[FRIAM] oops

Carl Tollander carl at plektyx.com
Sat Feb 18 22:09:37 EST 2012


Sorry for the misspelling, that's Arduino (arduino.cc).

On 2/18/12 8:03 PM, Carl Tollander wrote:
> Better still, getting local folks up to speed on the Ardunio platform 
> (e.g., Ultimaker uses 'em) might be a good idea.
>
> On 2/18/12 3:56 PM, Owen Densmore wrote:
>> The printer they use, ultimaker, goes for EUR1,194.00, roughly 
>> $1564.14. ( http://goo.gl/Vqcg0)
>>
>> Is it time we buy one?
>>
>>    -- Owen
>>
>> On Sat, Feb 18, 2012 at 2:33 PM, Tom Johnson <tom at jtjohnson.com 
>> <mailto:tom at jtjohnson.com>> wrote:
>>
>>     http://globalguerrillas.typepad.com/globalguerrillas/2012/02/printing-drones-by-the-sheet.html
>>
>>     Printing Drones by the Sheet (or how we get to tens of billions
>>     of drones by 2020)
>>
>>     -tom johnson
>>
>>     ============================================================
>>     FRIAM Applied Complexity Group listserv
>>     Meets Fridays 9a-11:30 at cafe at St. John's College
>>     lectures, archives, unsubscribe, maps at http://www.friam.org
>>
>>
>>
>>
>> ============================================================
>> FRIAM Applied Complexity Group listserv
>> Meets Fridays 9a-11:30 at cafe at St. John's College
>> lectures, archives, unsubscribe, maps athttp://www.friam.org
>
>
> ============================================================
> FRIAM Applied Complexity Group listserv
> Meets Fridays 9a-11:30 at cafe at St. John's College
> lectures, archives, unsubscribe, maps at http://www.friam.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://redfish.com/pipermail/friam_redfish.com/attachments/20120218/968c90df/attachment.html>


More information about the Friam mailing list